The fans are connected via the included Y-cable directly to the pump unit. By the push-pull configuration, a higher performance is possible than with only one fan. These offer specially made blades in the 120-mm fans a better relationship between the static pressure and noise and thus higher performance at a lower noise than ordinary fans.
These are optimized for a high static pressure, which is important for the operation together with a radiator. The H80i V2 has two very powerful fan from the Corsair Air Series, more precisely, two SP120L PWM. Compared to the previous model, the H80i V2 has been further optimized, now looks a little fancier and now has jacketed hoses. The fan again ensures that the radiator is constantly supplied by fresh air.
This in turn is pumped by the pump direction radiator, where the cooling liquid flows through a fine lamellar structure and transfers heat to the air flowing through. The bottom of the heat sink absorbs the heat from the processor and passes it through copper base plate efficiently to the water on. Since it is a closed circuit, the system does not require maintenance. In the housing of the cooler, the pump and the expansion tank are already installed. is mounted on a 120mm fans slot During the radiator in H80i V2, place the cooler on the CPU space. However, all compact watercooling systems combines the basic structure: They consist of two parts - the radiator and the heat sink.